 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 406-1 USB 2.0 Common Mode Choke - 0603 These Coilcraft filters are designed to eliminate virtually all common mode noise in high-speed, differential mode signal transmission applications such as USB 2.0, IEEE1394 and LVDS. Most provide greater than 15 dB common mode attenuation and greater than 100 ohms impedance. These low profile parts are designed for applications where space is at a premium, requiring less than half the board space of our 0805USB filters. These dual-wound filters feature very low DC resistance and are available in five impedance values to meet your specific requirements. Coilcraft Designer's Kit C384 contains samples of all values shown here plus all values in our 1206USB and 0805USB series. To order, contact Coilcraft or purchase online at http://order.coilcraft.com. Common mode impedance typ (Ohms) 100 MHz 500 MHz 1 GHz Common mode attenuation typ (dB) 100 MHz 500 MHz 1 GHz Part number1 Inductance2 DCR max3 min (nH) (Ohms) Isolation (Vrms) Irms4 (mA) 0603USB-251ML_ 0603USB-601ML_ 0603USB-951ML_ 0603USB-142ML_ 0603USB-222ML_ 25 60 95 145 225 44 99 156 242 384 64 142 234 353 592 1.31 3.00 4.62 6.85 9.14 3.16 6.88 9.75 12.80 16.53 8.45 13.27 16.06 18.16 20.29 18 37 63 98 150 0.077 0.109 0.142 0.174 0.209 250 250 250 250 250 500 500 500 500 500 1. When ordering, please specify packaging code: 0603USB-222MLC Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel). 2. Inductance measured at 100 MHz using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture. 3. DCR is specified per winding. 4. Current per winding that causes a 20C rise from 25C ambient. 5. Operating temperature range -40C to 85C. 6. Electrical specifications at 25C. 0.060 0.003 1,52 0,076 0.042 0.004 1,07 0,10 2 1 3 0.004 0,10 0.013 0.034 0,33 0,86 0.023 0,58 2 1 2 4 0.030 0,73 1 0.010 0,25 0.030 0.003 0,76 0,076 4 3 3 4 0.010 0,25 Recommended Land Pattern 0.012 0,30 Terminations: Gold over nickel over silver-palladium-glass frit Weight: 4.9 - 5.2 mg Tape and reel: 2000/7 reel; 7500/13 reel 8 mm tape width For packaging data see Tape and Reel Specifications section. Specifications subject to change without notice. Please check our website for latest information. Document 406-1 Revised 04/01/08 (c) Coilcraft, Inc. 2009 Document 406-2 USB 2.0 Common Mode Filter -- 0603 Typical Attenuation (Ref: 50 Ohms) 0 5 10 -222 -142 -951 -601 -251 Attenuation (dB) 15 20 25 30 35 Common mode Differential mode (typical for all parts) 40 1 10 100 1000 Frequency (MHz) Typical Impedance vs Frequency 1000 -222 -142 -951 -601 100 -251 Impedance (Ohms) 10 1 0.1 1 10 100 1000 Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. Document 406-2 Revised 04/01/08 (c) Coilcraft, Inc. 2009 |
Price & Availability of 0603USB-142ML
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |